Steel standards
-
This guide covers standard specification for hot-wrought special quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for general constructional applications. Heat analysis shall be performed wherein the material shall conform to the required che
-
This specification covers hot-wrought merchant quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for noncritical constructional applications. The bars shall be available in round, square and hexagonal shapes. The steel shall be made by the ope
-
This specification covers hot-wrought special quality carbon steel bars. Special quality bar applications include forging, heat treating, cold drawing, machining, and many structural uses. The steel shall be made by one or more of the following primary processes: open-hearth, basic-oxygen, or ele
-
ASTM A575 - 96(2007) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades This specification covers M-grade hot-wrought merchant quality carbon steel bars produced to a chemical composition. Merchant quality bars are used for structural and similar miscellaneous bar a
-
This specification covers the standard for carbon steel bars and shapes rolled from standard rail steel. The material shall be hot wrought from section T rails and shall be produced by hot forming slit railroad rail parts to yield straight lengths. One tension test and one hardness test shall be
-
ASTM A434 - 06 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered This specification covers hot-wrought and cold-finished quenched and tempered alloy steel bars. The steel materials shall be melt processed by using open-heart, basic oxygen, o
-
ASTM A400 - 69(2006) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties If the desired mechanical properties are as described in 4.1.1 for material identified as Classes P-1 through P-7, or in 4.1.2 for material identified as Classes Q-1
-
This specification covers standard specification for alloy steel bars, suitable for surface hardening by nitriding, designated as Classes A, B, C, and D. Class A and Class D bars are general-purpose bars; Class B bars are free-machining bars; Class C bars contain nickel and are characterized by h
-
ASTM A322 - 07 Standard Specification for Steel Bars, Alloy, Standard Grades This specification covers hot-wrought alloy steel bars. The steel shall be made by one or more of the following primary processes: open-hearth, basic-oxygen, or electric-furnace. The primary melting may incorpora
-
ASTM A311 / A311M - 04(2010) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements This specification covers cold-drawn, stress-relieved carbon steel bars subject to mechanical property requirements. The bars are furnished in
-
ASTM A304 - 05e2 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements This specification covers carbon and alloy steel bars subject to end-quench hardenability requirements. The methods for estimating the hardness value of the material ar
-
Historical Standard: ASTM A313/A313M-98 Standard Specification for Stainless Steel Spring Wire SUPERSEDED (see Active link, below) 1.1 This specification covers austenitic and age-hardenable stainless steel round spring wire intended especially for the manufacture of springs.
-
Significance and Use This test method covers the procedure for determining the hardenability of steel by the end-quench or Jominy test. The test consists of water quenching one end of a cylindrical test specimen 1.0 in. in diameter and measuring the hardeni
-
Abstract123 This specification covers the standard for hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of hot-wrought round steel bars. Cross sections for hot-wrought round, square, and round-cornered square bars of
-
Abstract This specification covers cold-finished carbon and alloy steel bars for heat treatment, machining into components, or for as-finished condition as shafting or in constructional applications. The steel materials shall be cold drawn, turned, ground,
-
Abstract This guide covers a group of requirements for carbon and alloy steel bars under each of the following specifications: hot-rolled carbon steel bars, cold-finished carbon steel bars, hot-rolled alloy steel bars, and cold-finished alloy steel bars. He
-
1. Scope 1.1 This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from black (that is, not galvanized) steel components. 1.2 The requirements of this specification do not apply
-
This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication. Welded wire mesh fence fabric is classified in accordance with coating as follows: Type 1; Type 2; Type 3; and Type 4
-
ASTM F2408 - 09 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets ASTM F2408 Abstract This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from galvanized steel components
-
ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, a
-
Theoretical Bursting And Bulging Pressures For Tubing
Theoretical Bursting And Bulging Pressures For Tubing Corresponding to a fiber stress in wall of 10,000 pounds per square inch
Outside Diamet -
Aluminum Tube Specifications
WW-T-700/GEN Federal General Specification for Drawn Seamless Alum -
Aluminum Tube Specifications
ASTM-B-210 Drawn Seamless Aluminum Alloy Tubes for General Purpose -
Aluminum Tube Tolerances Seamless Extruded Round Tubing Diameter Specified Diameter Inches
Theoretical Bursting & Collapsing Pressures For Pipe
Theoretical Bursting & Collapsing Pressures For Pipe Stainless Steel (ASTM-A-312) Nominal Size Inches Schedule Number Outside Diameter (Inches)
Aluminum Tube Data Typical Properties
Designation of Aluminum Alloys
Designation of Aluminum Alloys
Major Alloy Groups Aluminum Pipe All items are seamless unless noted otherwise. Structural pipe should not be used for pressure applications. Specifications Alloy-Temper
Aluminum Tube Condition Designations D-Drawn E-Extruded SC-Square Corners FG-Furniture grade PORT-Porthole
Non-Ferrous Tube ALUMINUM TUBE Condition Designations
A total of 129 records Page: 4/5 page: 30 records 9 [1][2][3] 4 [5] :