Steel standards
-
HIGH TENSILE STEEL PLATE APPLICATION
Cobalt Base Alloys
ASTM A322 - 07 Standard Specification for Steel Bars, Alloy, Standard Grades
ASTM A322 Abstract This specification covers hot-wrought alloy steel bars. The steel shall be made by one or more of the following primary processes: open-hearth, basic-oxygen, or electric-furnace. The primary melting may incorporate separate degassing or refining and may be follow
ASTM A311 / A311M - 04(2010) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bar
ASTM A311 / A311M Abstract This specification covers cold-drawn, stress-relieved carbon steel bars subject to mechanical property requirements. The bars are furnished in two classes, A and B. Class A are normal-draft cold-drawn and stress-relieved rounds, squares, hexagons, and fla
ASTM A304 - 11 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenab
ASTM A304 Abstract This specification covers carbon and alloy steel bars subject to end-quench hardenability requirements. The methods for estimating the hardness value of the material are presented. Method A is the minimum and maximum hardness values at any desired distance, Metho
ASTM A255 - 10 Standard Test Methods for Determining Hardenability of Steel
ASTM A255 Significance and Use This test method covers the procedure for determining the hardenability of steel by the end-quench or Jominy test. The test consists of water quenching one end of a cylindrical test specimen 1.0 in. in diameter and measuring the hardening response as
ASTM A125 - 96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated
ASTM A125 Abstract This specification covers the standard for hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of hot-wrought round steel bars. Cross sections for hot-wrought round, square, and round-cornered square bars of ste
ASTM A108 - 07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A108 Abstract This specification covers cold-finished carbon and alloy steel bars for heat treatment, machining into components, or for as-finished condition as shafting or in constructional applications. The steel materials shall be cold drawn, turned, ground, polished, hot w
ASTM A29 / A29M - 11a Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General
ASTM A29 / A29M Abstract This guide covers a group of requirements for carbon and alloy steel bars under each of the following specifications: hot-rolled carbon steel bars, cold-finished carbon steel bars, hot-rolled alloy steel bars, and cold-finished alloy steel bars. Heat and pr
ASTM F2589 - 06 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
ASTM F2589 1. Scope 1.1 This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from black (that is, not galvanized) steel components. 1.2 The requirements of this specification do not apply to vertical b
Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Mes
ASTM F2453 / F2453M Abstract This specification covers welded wire mesh fence fabric produced from steel wire or metallic-coated steel wire. The metallic-coated fabric may be polymer coated after fabrication. Welded wire mesh fence fabric is classified in accordance with coating as
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
ASTM F2408 Abstract This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from galvanized steel components. Steel material for tubular picket ornamental fence system structural components shall be galvanized by the hot
1.Low Carbon Steel Wire Rod JIS
Alnico® 4 (Isotropic, Cast) Hard Magnetic Alloy
Alnico® 4 (Isotropic, Cast) Hard Magnetic Alloy Categories: Metal; Electronic/Magnetic Alloy; Ferrous Metal Material Notes: 56Fe-12Al-27Ni-5Co Physical Properties Metric English &nbs
Alnico® 1 (Isotropic, Cast) Hard Magnetic Alloy
Alnico® 1 (Isotropic, Cast) Hard Magnetic Alloy Categories: Metal; Electronic/Magnetic Alloy; Ferrous Metal Material Notes: 59Fe-12Al-21Ni-5Co-3Cu Physical Properties Metric English
Overview of materials for Alpha/Beta Titanium Alloy
Overview of materials for Alpha/Beta Titanium Alloy Categories: Metal;
Titanium, Ti Categories: Metal; Nonferrous Metal; Titanium Alloy; Pure
ASTM A390 Abstract This specification covers zinc-coated fence fabric intended for enclosure of poultry, or to prevent entry into special areas. It is available in three styles as: poultry netting; poultry-and-garden fence fabric; and chick fence fabric. The zinc used for the coati
ASTM A363 Abstract This specification covers high strength, extra-high-strength, and utilities grades of concentric lay steel wire strand composed of three wires or seven wires in class A, class B, or class C zinc coatings specifically intended for use as overhead ground wires or s
ASTM A121 Abstract This specification covers metallic-coated carbon steel barbed wire, consisting of a strand of two wires. The barbed wire is available with aluminum, zinc, and zinc-aluminum-mismatched alloy coatings with a number of coating weights. The barbed wire is classified
ASTM A116 Abstract This specification covers metallic-coated steel-woven wire fence fabric having a series of horizontal (line) wires, with vertical (stay) wires either wrapped around the line wire (hinge joint) or fixed with another separate wire to the line wire (continuous stay
ASTM A111 Abstract This specification covers the standard requirements for iron wire with Class A, Class B, and Class C zinc coatings suitable for use in telephone, telegraph, and signal transmission lines. The zinc used for the coatings shall be of any grade while the base metal s
ASTM A700 Abstract These practices cover the packaging, marking, and loading of steel products for shipment, and are intended to deliver the products to their destination in good condition. It is also intended that these recommendations be used as guides for attaining uniformity, s
ASTM A686 Abstract This specification covers chemical, mechanical, and physical requirements for available wrought carbon tool steel products. These products, which include hot- or cold-finished bar, plate, sheet, rod, wire, or forgings, are normally fabricated into tools, dies, or
ASTM A681 Abstract This specification covers the chemical, mechanical, and physical requirements for available wrought alloy tool steel products. The material shall be made by an electric melting process. It shall be made from ingots that have been reduced in cross section in such
ASTM A600 Abstract This specification covers seven tungsten-type (types T1, T2, T4, T5, T6, T8, and T15) and nineteen molybdenum-type high-speed steels (types M1, M2, M3, M4, M6, M7, M10, M30, M33, M34, M36, M41, M42, M43, M44, M46, M47, M48, and M62) in the form of annealed, hot-r
ASTM A597 Abstract This specification covers tool steel compositions appropriate for usable shapes cast by pouring directly into suitable molds and for master heats for remelting and casting. Grades of the tool steel covered in this specification include air- and oil-hardening grad
ASTM A561 Abstract This practice covers macroetch testing used for evaluating the quality of tool steel bars. This test shall be used as a quality control and inspection test to reveal Standards for Foil GOST 618 Aluminium foil for technical purpouses GOST 745 Aluminium foil for packing GOST 5638 Copper roll foil for technical purposes GOST 18394 Tin plated lead and tin foil GOST 18846 Zinc foil GOST 24353 Sheets of foil made of p
A total of 129 records Page: 1/5 page: 30 records 1 [2][3][4][5] :