AISI ClassA,B,C(Mn-Mo) Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- Grades
- Special Alloy
- » ClassA,B,C(Mn-Mo)
ASTM E-1
UNS J91249
ASTM E-2
UNS J91339
UNS J91340
ASTM F
ClassA,B,C(V)
Grade1
ClassA,B,C
Grade1 - AISI
- USA
Chemical composition % of the ladle analysis of grade ClassA,B,C(Mn-Mo)
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) |
Max 0.30 | Max 0.80 | 1.00-1.40 | Max 0.04 | Max 0.045 | 0.35 | 0.50 | 0.10-0.30 | 0.03 | 0.10 | 0.50 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
917 (≥) | 526 (≥) | 34 | 23 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
799 (≥) | 535 (≥) | 33 | 13 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 424 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
551 | 894 | 726 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
PH13-8Mo, 1.4534, Alloy 13-8 | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
||
XH33TMДЮ(ЭK63,BHC-45) | Russia TY standard corrosion resistant alloy hot rolled and forged bars |
||
SKD-11 | Mainly used for cold working mold: gauge, die for thread rolling, cutting tool for metal, forming roll, die for press. |
||
06Cr25Ni20 | Petroleum, electronics, chemical industry, medicine, textile, food, machinery, building, nuclear power, aerospace, military industry and other industries! |
||
Z6CNU17-04 | PH Stainless Steel |
||
Nickel 200 | Acid or alkaline food production (fruit juices, ice-creams), cristallization and concentration of mineral salts. Concentration of caustic salts. Machineries in which hydrocarbons are in reaction with fluorides. Storing and carriage of phenol. Production o |
||
1.4122, X35CrMo17, X39CrMo17-1 | Rolled, Wrought or Cast Stainless Steel Products for Medical Instruments |
||
403CB+, H46, B50A365, S40300, B50A365B,403 | STAINLESS STEEL BAR & FORGINGS,CHROMIUM-NIOBIUM-IRON ALLOY |
||
1.3532, 16NiCrMo16-5 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
||
1.2250, 45WCrV7, 45WCrV8 | Knife Steel |
||
DNVGL VL GL D36 | High Strength Structural Steel Plate |
||
DNVGL VL NV D36 | High Strength Structural Steel Plate |
||
15CDV6 Air 9160/C | wrought steels used in aeronautical constructions |
||
21CrMoV5-7, 1.7709, 21CrMoV5-11, 1.8070 | high temperature boiler steels for energy industries |
||
NC20T, NiCr20Ti, N06075, 2.4951, NiCr20Ti | Nickel and nickel alloy forgings |
||
X10CrNi18-8, 1.4310, 301, 301S21, Z12CN17-07 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
||
X19CrMoNbVN11-1,1.4913 | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
||
55NiCrMoV7, 1.2714 | The grades are used in the production of forging machine components - forging dies, parts of extrusion presses, hot knives or deburring plates. |
||
15-5PH,1.4545,X5CrNiCuNb15-5,S15500 | High temperature alloys and other special alloys |
||
17-4PH, 1.4542, X5CrNiCuNb16-4 | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) |
Relevant products
-
X165CrMoV12 Cold working die steel
-
T30402/X155CrVMo121 Die Steel Sheet
-
UMCo-50
-
17-4ph(S17400,630) Stainless Steel Sheet
-
1.2714(L6, 55NiCrMoV7, SKT4,BH224-5) Hot-Work Mould Steel
-
SKD11(D2, 1.2379, X153CrMo12) Cold Work Tool Steel
-
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Forged Bars
-
630 / 17-4ph ESR Steel for Equipment for making masks
-
21CMoV5-7,1.7709,21CRMOV5-11,1.8070 Forgings
-
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar
-
X8CrMnN18-8, 1.3816 non-magnetizable rotor retaining rings
-
X3CRNIMOAL13-8-2, 1.4534, PH13-8MO, UNS S13800
-
1.4980 Round Bar
-
S66286 round bar
-
X19CrMoVNbN11-1 / 1.4913 Disc Forging
-
G-X2CrNiMnMoNNb21-16-5-3 non-magnetic steel
-
Steel of Turbine blade B50A947 A4
-
1.2779 Intermediate Liner / Hollow Bar
-
410Cb Forging
ClassA,B,C(Mn-Mo) Equivalent Grade Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Sheet | Select | 0 | Select | Enquiry | ||
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry | ||
SA-437 Grade B4B/SUS 616 /422 Forged Bar | Dia.160xL | Round Bar | Kgs | 2120 | Forged+QT | Enquiry |
Stainless Steel 422 / Alloy 422 AMS 5655 UNS S42200/616/B4B Round Bar Stock | Select | 0 | Select | Enquiry | ||
1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry | ||
B16 Round Bar Stock | Select | 0 | Select | Enquiry |