AFNOR Z6CNT18-10B Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Z6CNT18-10B
X12CrNiMoV12-3
X12Ni5
X15CrMo5-1
X19CrMoNbVN11-1
X22CrMoV12-1
Z6CNDT17-13B
Z3CAT18
Z5NCTDV26-15B
Z6CND17-13B
Z6CNNb18-12B - AFNOR
- France
- Heat-Resistant Steel
Chemical composition % of the ladle analysis of grade Z6CNT18-10B
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Mo(%) | B(%) | Ti(%) |
0.04-0.08 | Max 0.75 | Max 2.00 | Max 0.040 | Max 0.015 | 17.5-19.0 | 9.00-11.0 | 0.0015-0.0060 | 4(C+N) Max 0.60 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
728 (≥) | 142 (≥) | 31 | 14 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
631 (≥) | 137 (≥) | 32 | 42 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
514 | 712 | 495 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |