AFNOR X22CrMoV12-1 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » X22CrMoV12-1
X6CrNiMoB17-12-2
X6CrNiTiB18-10
X6NiCrTiMoB25-15-2
X7CrNiMoBNb16-6
X8Ni9
X10CrNiMoMnNbVB15-10-1
X12CrNiMoV12-3
X12Ni5
X15CrMo5-1
X19CrMoNbVN11-1 - AFNOR
- France
- Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999))
Chemical composition % of the ladle analysis of grade X22CrMoV12-1
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | V(%) |
| 0.18-0.24 | Max 0.50 | 0.40-0.90 | Max 0.025 | Max 0.015 | 11.0-12.5 | 0.30-0.80 | 0.80-1.20 | 0.25-0.35 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 661 (≥) | 569 (≥) | 31 | 12 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 381 (≥) | 585 (≥) | 32 | 24 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 856 | 887 | 636 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 1.4923 | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 |
||
| X 22 CrMoV 12-1 | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 |
||
| X22CrMoV12-1 | Creep resisting steels, nickel and cobalt alloys |
||
| 1.4923 | Creep resisting steels, nickel and cobalt alloys |
||
| 1.4923 | Creep resisting steels, nickel and cobalt alloys |
||
| X22CrMoV12-1, 1.4923 | Creep resisting steels, nickel and cobalt alloys |
Relevant products
X22CrMoV12-1 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
| X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |