AFNOR Z5NCTDV26-15B Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Z5NCTDV26-15B
X7CrNiMoBNb16-6
X8Ni9
X10CrNiMoMnNbVB15-10-1
X12CrNiMoV12-3
X12Ni5
X15CrMo5-1
X19CrMoNbVN11-1
X22CrMoV12-1
Z6CNDT17-13B
Z3CAT18 - AFNOR
- France
- Heat-Resistant Steel
Chemical composition % of the ladle analysis of grade Z5NCTDV26-15B
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
| Max 0.05 | Max 0.50 | Max 2.00 | Max 0.020 | Max 0.015 | 13.5-16.0 | 1.00-1.50 | 24.0-27.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 647 (≥) | 318 (≥) | 24 | 31 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 485 (≥) | 719 (≥) | 14 | 33 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 385 | 285 | 751 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z5NCTDV26-15B | Iron and steel. Stainless steel for high temperature application |
||
| 1.4980 | Creep resisting steels, nickel and cobalt alloys |
||
| X6NiCrTiMoVB25-15-2 | Creep resisting steels, nickel and cobalt alloys |
||
| IncoloyA-286 | Creep resisting steels, nickel and cobalt alloys |
