AFNOR Z80CNS20-02 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Z80CNS20-02
Z35CNWS14-14
Z40CSD10
Z45CNW18-09
Z45CS9
Z50CMNNb21-09-02Az
Z53CMN21-09Az
Z53CMNNb21-09-02Az
Z53CMNS21-09Az
Z55CMN20-08Az
Z60CMDVNb21-10Az - AFNOR
- France
- Steel Exhaust Valves
Chemical composition % of the ladle analysis of grade Z80CNS20-02
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) |
0.75-0.85 | 1.75-2.50 | Max 0.80 | Max 0.040 | Max 0.030 | 19.5-21.0 | 1.00-1.70 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
611 (≥) | 843 (≥) | 42 | 42 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 312 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
654 (≥) | 246 (≥) | 33 | 32 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
559 | 896 | 595 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
Z80CNS20-02 | Valve steels and alloys for internal combustion engines |