AFNOR Z55CMN20-08Az Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Z55CMN20-08Az
Z20CN21-12Az
Z25CNWS20-09
Z35CNWS14-14
Z40CSD10
Z45CNW18-09
Z45CS9
Z50CMNNb21-09-02Az
Z53CMN21-09Az
Z53CMNNb21-09-02Az
Z53CMNS21-09Az - AFNOR
- France
- Steel Exhaust Valves
Chemical composition % of the ladle analysis of grade Z55CMN20-08Az
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | N(%) |
0.50-0.60 | Max 0.25 | 7.00-10.0 | Max 0.040 | Max 0.030 | 19.5-21.5 | 1.50-2.75 | 0.20-0.40 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
259 (≥) | 334 (≥) | 24 | 32 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
619 (≥) | 683 (≥) | 24 | 24 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
398 | 689 | 795 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
Z55CMN20-08Az | Valve steels and alloys for internal combustion engines |