AFNOR X10CrNi18-8 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » X10CrNi18-8
X3CrNiMo13-4
1.4313
1.4418
X4CrNiMo16-5-1
X5CrNiCuNb16-4
1.4542
X7CrNiAI17 7
1.4568
X8CrNiMoAI15-7-2
1.4532 - AFNOR
- France
- Austenite
Chemical composition % of the ladle analysis of grade X10CrNi18-8
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) |
| 0.05-0.15 | Max 2.00 | Max 2.00 | Max 0.040 | Max 0.015 | 16.00-19.00 | 6.00-9.50 | Max 0.08 | Max 0.11 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 722 (≥) | 753 (≥) | 11 | 21 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 441 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 533 (≥) | 854 (≥) | 21 | 32 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 443 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 545 | 986 | 375 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X10CrNi18-8 | Stainless steels - Part 1: List of stainless steels |
||
| 1.4310 | Stainless steels - Part 1: List of stainless steels |
||
| X10CrNi18-8 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
||
| 1.4310 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
||
| X10CrNi18-8 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
||
| 1.4310 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
||
| X10CrNi18-8 | Stainless steels - Chemical composition |
||
| X10CrNi18-8, 1.4310, 301, 301S21, Z12CN17-07 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |