UNS Type410Cb(XM-30) Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » Type410Cb(XM-30)
erralium255
S32950
S32950
7-MoPLUS
7-MoPLUS
S41008
S41008
Type410S
Type410S
Type410Cb(XM-30) - UNS
- USA
- Martensitic special steel
Chemical composition % of the ladle analysis of grade Type410Cb(XM-30)
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Nb(%) |
| 0.15 | 1 | 1 | Max 0.04 | Max 0.03 | 11.5-13.5 | 0.05-0.20 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 328 (≥) | 787 (≥) | 24 | 32 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 737 (≥) | 197 (≥) | 44 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 578 | 836 | 441 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 276 S41040 | Stainless Steel Bars and Shapes |
||
| S41040 | Martensitic Chromium Stainless Steel with Columbium |
||
| A 240 S44627 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 268 S44627 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 276 S44627 | Stainless Steel Bars and Shapes |
||
| S44627 | Ferritic Chromium Molybdenum Columbium Stainless Steel |
||
| SA-240 S44627 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| SA-268 S44627 | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 581 S20300 | Free-Machining Stainless Steel Wire and Wire Rods |
||
| A 582 S20300 | Standard Specification for Free-Machining Stainless Steel Bars |
||
| F 837 Class A1-50 S20300 | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
||
| F 837 Class A1-55 S20300 | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
||
| F 837 Class A1-70 S20300 | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
||
| F738 Class A1-50 S20300 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F738 Class A1-70 S20300 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F738 Class A1-80 S20300 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
||
| F836 Class A1-50 S20300 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
||
| F836 Class A1-70 S20300 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
||
| F836 Class A1-80 S20300 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
||
| S20300 | Austenitic Chromium Manganese Nickel Copper Free Machining Stainless Steel |