UNS S32950 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » S32950
2304
2304
S32404
S32404
Uranus50
Uranus50
S32550
S32550
erralium255
erralium255 - UNS
- USA
- Dual-phase steel
Chemical composition % of the ladle analysis of grade S32950
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) |
| 0.03 | 0.6 | 2 | Max 0.035 | Max 0.01 | 26.0-29.0 | 3.50-5.20 | 1.00-2.50 | 0.15-0.35 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 749 (≥) | 116 (≥) | 33 | 11 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 324 (≥) | 125 (≥) | 31 | 42 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 973 | 415 | 346 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 1049 S32950 | Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
||
| A 1082 S32950 | High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
||
| A 240 S32950 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 314 S32950 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S32950 | Stainless Steel Forgings |
||
| A 479 S32950 | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
||
| A 511 S32950 | Seamless Stainless Steel Mechanical Tubing |
||
| A 789 S32950 | Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
||
| A 790 S32950 | Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
||
| A 815 CRS32950 | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
||
| A 815 WPS32950 | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
||
| A 928 S32950 | Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
||
| A 949 S32950 | Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
||
| A 959 S32950 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
||
| A 988 S32950 | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
||
| S32950 | Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Nitrogen Stainless Steel |
||
| SA-240 S32950 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| SA-479 S32950 | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
||
| SA-789 S32950 | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Tubing for General Service |
||
| SA-790 S32950 | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Pipe |