CNS CNS 302 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » CNS 302
G20CrNi2Mo
G20Cr2Ni4
G10CrNi3Mo
G20Cr2Mn2Mo
(G)9Cr18
(G)9Cr18Mo
(G)1Cr18Ni9Ti
CNS 201
CNS 202
CNS 301 - CNS
- China
- China Taiwan Stainless steel
Chemical composition % of the ladle analysis of grade CNS 302
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| Max 0.15 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.00 | 17.00-19.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 872 (≥) | 134 (≥) | 33 | 42 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 186 (≥) | 988 (≥) | 33 | 24 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 323 | 591 | 643 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| HNV5 | Steel for intake valves |
||
| S63005 | Steel for intake valves |
||
| Z1CNS17-15 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z11CNS17-07Az | Stainless steels for general purposes. Plates, wide strips and strips |
||
| Z15CNS25-20 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z17CNS20-12 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z80CNS20-02 | Valve steels and alloys for internal combustion engines |
||
| T72302 | Carbon tool steel products which include hot or cold finished bar, plate, sheet, rod, wire, or forgings, which are normally fabricated into tools, dies, or fixtures. |
||
| GH2302 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH4302 | Nickel-base superalloy |
||
| A 167 Type 302 | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
||
| A 240 S30200 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 276 S30200 | Stainless Steel Bars and Shapes |
||
| A 313 S30200 Class 1 | Stainless Steel Bars and Shapes |
||
| A 313 S30200 Class 2 | Stainless Steel Spring Wire |
||
| A 314 S30200 | Stainless Steel Billets and Bars for Forging |
||
| A 368 S30200 | Stainless Steel Wire Strand |
||
| A 473 S30200 | Stainless Steel Forgings |
||
| A 478 S30200 | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
||
| A 492 S30200 | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |