CNS CNS 202 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » CNS 202
G20CrMo
G20CrNiMo
G20CrNi2Mo
G20Cr2Ni4
G10CrNi3Mo
G20Cr2Mn2Mo
(G)9Cr18
(G)9Cr18Mo
(G)1Cr18Ni9Ti
CNS 201 - CNS
- China
- China Taiwan Stainless steel
Chemical composition % of the ladle analysis of grade CNS 202
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | N(%) |
| Max 0.15 | Max 1.00 | 7.50-10.5 | 0.06 | 0.03 | 4.00-6.00 | 17.00-19.00 | Max 0.25 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 545 (≥) | 358 (≥) | 33 | 42 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 638 (≥) | 716 (≥) | 34 | 31 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 618 | 313 | 674 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| HNV5 | Steel for intake valves |
||
| S63005 | Steel for intake valves |
||
| Z1CNS17-15 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z11CNS17-07Az | Stainless steels for general purposes. Plates, wide strips and strips |
||
| Z15CNS25-20 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z17CNS20-12 | Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels |
||
| Z80CNS20-02 | Valve steels and alloys for internal combustion engines |
||
| 202 | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
||
| ASTM 202 | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
||
| S20200 | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
||
| A 895 S42020 | Free-Machining Stainless Steel Plate, Sheet, and Strip |
||
| S42020 | Martensitic Chromium Stainless Steel |
||
| A 582 S42023 | Standard Specification for Free-Machining Stainless Steel Bars |
||
| A 895 S42023 | Free-Machining Stainless Steel Plate, Sheet, and Strip |
||
| S42023 | Martensitic Chromium Stainless Steel |
||
| A 582 S42023 | Standard Specification for Free-Machining Stainless Steel Bars |
||
| A 895 S42023 | Free-Machining Stainless Steel Plate, Sheet, and Strip |
||
| S42023 | Martensitic Chromium Stainless Steel |
||
| SUS 202 | Stainless steel bars |
||
| SUS 202 | Hot-rolled stainless steel plates, sheet and strip |