A534 - 09
This specification covers Standards for carburizing steels to be used in anti-friction bearings. Materials shall conform to carbon, manganese, phosphorus, sulfur, chromium, nickel, molybdenum, copper, oxygen, and aluminum contents. Materials shall adhere to inclusion ratings set for thin and heavy series. Grain size and hardenability requirements shall be followed. Decarburization and surface imperfections of hot-rolled, cold-finished, or annealed bars and tubes shall not exceed specified limits as measured through microscopical methods.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the Standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers the requirements for carburizing bearing-quality steel to be used in the manufacture of anti-friction bearings.
1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered Standard.
2. Referenced Documents
Standards
A29/A29M Specification for steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A255 Test Methods for Determining Hardenability of steel
A304 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A510 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon steel
A519 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752 Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
E45 Test Methods for Determining the Inclusion Content of Steel
E112 Test Methods for Determining Average Grain Size
E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E1077 Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ISO Standard
ISO683Part17: Ball and Roller Bearing Steels
Index Terms
Anti-friction bearings--specifications; Ball/roller bearings--specifications; Carburizing applications--specifications; Steel billets and blooms--specifications; ICS Number Code 77.140.10 (Heat-treatable steels)
DOI: 10.1520/A0534-09
[Back to Top]