AFNOR X4CrNi18-12 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » X4CrNi18-12
X2CrNi19-11
1.4306
X2CrNiN18-10
1.4311
X2CrNi18-10
1.4301
X8CrS18-9
1.4305
X6CrNiTi18a-10
1.4541 - AFNOR
- France
- Austenite
Chemical composition % of the ladle analysis of grade X4CrNi18-12
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | N(%) |
| Max 0.06 | Max 1.00 | Max 2.00 | Max 0.045 | Max 0.015 | 17.00-19.00 | 11.00-13.00 | Max 0.11 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 499 (≥) | 793 (≥) | 31 | 11 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 222 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 641 (≥) | 156 (≥) | 24 | 41 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 836 | 316 | 924 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X4CrNi18-12 | Stainless steels - Technical delivery conditions for drawn wire |
||
| 1.4303 | Stainless steels - Technical delivery conditions for drawn wire |
||
| X4CrNi18-12 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
||
| 1.4303 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
||
| X4CrNi18-12 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
||
| 1.4303 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |