ISO ISO H2 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » ISO H2
ISO X2CrNiMoN17-13 Tube
ISO X9CrNi18-8
ISO X5CrNiMo17-12-2 wire
ISO X7CrNiAl17-7 wire
ISO X5CrNi18-10 strip
ISO X12CrNi17-7 strip
ISO X6CrNiMo17-12-2 strip
ISO X7CrNiAl17-7 strip
ISO X6CrTi12
ISO H1 - ISO
- ISO
- ISO standard thermal deformation of stainless steel
Chemical composition % of the ladle analysis of grade ISO H2
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
| Max 0.080 | Max 1.00 | Max 1.00 | Max 0.040 | Max 0.030 | 11.5-14.0 | Max 0.75 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 747 (≥) | 199 (≥) | 14 | 22 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 333 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 629 (≥) | 744 (≥) | 24 | 42 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 868 | 522 | 445 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH2018 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2036 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2038 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2130 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2132 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2135 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2136 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2302 | Classification and designation for superalloys and high temperature intermetallic materials |
||
| GH2901 | Iron-based superalloy |
||
| 11X11H282MΦ | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 16X11H282MΦ | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 25X13H2 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 20X17H2 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 14X17H2 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X18Γ8H2T | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X10H20T2 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 10X11H20T3P | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 10X11H23T3MP | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X15H24B4TP | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 36X18H25C2 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
Relevant products
ISO H2 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
| 1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
| 1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry |