ISO ISO H12 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » ISO H12
ISO H5
ISO X10CrAlSi25
ISO H6
ISO X15CrN26
ISO H7
ISO X7CrNi18 9
ISO H10
ISO X7CrNiTi18 10
ISO H11
ISO X7CrNiNb18 10 - ISO
- ISO
- ISO standard Austenite size heat resistant steel
Chemical composition % of the ladle analysis of grade ISO H12
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Nb(%) |
| Max 0.10 | Max 1.0 | Max 1.00 | Max 0.045 | Max 0.030 | 17.0-19.0 | 9.0-12.0 | 10x％C≤1.2 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 866 (≥) | 426 (≥) | 44 | 14 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 311 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 469 (≥) | 177 (≥) | 43 | 23 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 265 | 295 | 277 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 15X18H12C4TЮ | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 03X18H12 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 03X18H12T | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 12X18H12T | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X18H12Б | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 05X21H12Γ2БPЩ | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X18H12T | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X19H12TΦ | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 08X20H12AБΦ | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| 20X12H12Γ6 | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
||
| ISO H12 | Stainless steels - Chemical composition |
||
| H12 | Hot-Work Tool Steel |
||
| H12 | Hot-Work Tool Steel |