CNS CNS 303Se Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » CNS 303Se
ISO X21CrMoNiV12 2
ISO X12CrMoV12 6
ISO X12CrMo12 6
ISO X11CrNiWTi17 13 3
ISO X6NiCrTiMoVB25 15 2
CNS 201
CNS 202
CNS 301
CNS 302
CNS 303 - CNS
- China
- CNS standard stainless steel austenite size
Chemical composition % of the ladle analysis of grade CNS 303Se
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Other(%) |
| Max 0.15 | Max 1.00 | Max 2.00 | Max 0.20 | Max 0.060 | 17.00-19.00 | 8.00-10.00 | Se: Min 0.15 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 462 (≥) | 911 (≥) | 32 | 43 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 312 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 976 (≥) | 176 (≥) | 23 | 43 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 627 | 696 | 713 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 303Se | Stainless and heat resisting steels |
||
| A 314 303Se | Stainless and heat resisting steels |
||
| A 473 303 Se | Austenitic stainless steel forgings for general use |
||
| A 511 MT303Se | Austenitic stainless steel forgings for general use |
||
| A 581 Type 303Se | Free machining stainless and heat resisting steel wire |
||
| A 582 Type 303Se | Free-machining stainless steel bars |
||
| A 895 Type 303Se | Free-machining stainless steel bars |
||
| A 959 Type 303Se | Specifying harmonized standard grade compositions for wrought stainless steels |
||
| F 593 303 Se | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
||
| F 594 303Se | Standard Specification for Stainless Steel Nuts |
||
| F 880 Class A1-50 303Se | Standard Specification for Stainless Steel Socket Set Screws (Metric) |
||
| F 880 Class A1-70 303Se | Standard Specification for Stainless Steel Socket Set Screws (Metric) |
||
| SUS 303Se | Standard Specification for Stainless Steel Socket Set Screws (Metric) |
||
| SUS303Se | Standard Specification for Stainless Steel Socket Set Screws (Metric) |
||
| A 314 S30323 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S30323 | Stainless Steel Forgings |
||
| A 581 S30323 | Free-Machining Stainless Steel Wire and Wire Rods |
||
| A 582 S30323 | Standard Specification for Free-Machining Stainless Steel Bars |
||
| A 895 S30323 | Free-Machining Stainless Steel Plate, Sheet, and Strip |
||
| F738 Class A1-50 S30323 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |