BH13 Enquiry | Print this page
- Category
- Type
- Steel grade
- Country
- USE
- Grades
- Special Alloy
- » BH13
:BH10
:BH10
BH10A
BH10A
BH11
BH11
BH11
BH11
BH12
BH12 - UK
- Carbide for cutting tools
Chemical composition % of the ladle analysis of grade BH13
| C(％) | Si(％) | Mn(％) | Cr(％) | Ni(％) | Mo(％) | V(%) | Other(%) |
| 0.32-0.42 | 0.85-1.15 | ≤0.40 | 4.75-5.25 | ≤0.40 | 1.25-1.75 | 0.90-1.10 | Cu≤0.20,Sn≤0.05,Co4.00-4.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 227 (≥) | 755 (≥) | 11 | 42 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 149 (≥) | 349 (≥) | 12 | 14 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 433 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 335 | 649 | 987 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |