600 Nickel Bar
600 Nickel Bar properties and heat treatment forged piece, Including 600 Nickel Bar application and specifications, We have all specifications，Including 600 Nickel Bar steel plate, 600 Nickel Bar sheet, 600 Nickel Bar square steel, 600 Nickel Bar flat bar,600 Nickel Bar round bar,600 Nickel Bar forgings, we can own production and sales.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
forged/hot rolling/ extrusion of steel
We can produce the 600 Nickel Bar has the following specifications:
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade 600 Nickel Bar and Standards
600 Nickel Bar
UNS N06600
Nickel 600, commonly known as UNS N06600, is a nickel-chromium based alloy; its characteristics include good oxidation resistance to higher temperatures, good resistance to carburizing and chloride containing environments. Nickel 600 was designed for use from cryogenic to elevated temperatures in the range of 2000° F. The high nickel content (75%) enables this alloy to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. This content is also the reason for its resistance to chloride-ion stress-corrosion cracking and resistance to alkaline solutions. Conversely, its chromium content gives resistance to sulfur compounds and various oxidizing environments; the chromium makes it superior to commercially pure nickel under oxidizing conditions. Nickel 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability.
Industries that use 600 include:
- Aerospace
- Downhole
- Oil Industry
Products partially or completely constructed of 600 include:
| Stocking Diameters | ½” to 18” |
|---|---|
| Material Lengths | Up to 12’ |
| Uns | Type | Ams | Astm | Federal | Characteristics |
|---|---|---|---|---|---|
| N06600 | ALLOY 600 | 5665 | B-166 | - | Excellent high temperature strength and rust resistance, also has immense corrosion resistance due to stressful conditions and cracking. |
| C | MN | P | S | SI | CR | NI | MO | CU | OTHER | M/NM |
|---|---|---|---|---|---|---|---|---|---|---|
| .15 | 1. | .15 | .5 | 14. - 17. | 72. Min | .5 | Al. 35 Ti .5 Cb + Ta = 1. Co 1. Fe 6. - 10. |
NM |
Machining performance
Download 600 Nickel Bar the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.