CSN 42 2895 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 42 2895
17 481
17 483
17 536
17 618
42 2880
42 2881
42 2882
42 2887
42 2891
42 2893 - CSN
- Czech Republic
- The Czech republic Stainless steel
Chemical composition % of the ladle analysis of grade 42 2895
| C(％) | Si(％) | Mn(％) | S(％) | Cr(％) | Ni(％) | Cu(%) | Co(%) | Nb(%) | Al(%) | Ti(%) |
| 0.1 | 0.3 | 0.3 | 0.5 | Max 0.06 | 13.0-16.0 | 2.50-4.00 | 23.0-26.0 | 1.20 | 7.50-8.50 | Max 0.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 491 (≥) | 771 (≥) | 33 | 34 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 264 (≥) | 929 (≥) | 23 | 41 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 613 | 481 | 874 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH4220 | Nickel-base superalloy |
||
| S42400 | Ferritic Chromium Nickel Molybdenum Stainless Steel |
||
| A 240 S42900 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 268 S42900 | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 276 S42900 | Stainless Steel Bars and Shapes |
||
| A 314 S42900 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S42900 | Stainless Steel Forgings |
||
| A 493 S42900 | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
||
| S42900 | Ferritic Chromium Stainless Steel |
||
| SA-240 S42900 | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| SA-268 S42900 | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
||
| A 176 S44200 | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
||
| S44200 | Ferritic Chromium Heat Resisting Steel |
||
| A 176 S42000 | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
||
| A 276 S42000 | Stainless Steel Bars and Shapes |
||
| A 314 S42000 | Stainless Steel Billets and Bars for Forging |
||
| A 473 S42000 | Stainless Steel Forgings |
||
| A 580 S42000 | Stainless Steel Wire |
||
| S42000 | Martensitic Chromium Stainless Steel |
||
| A 895 S42020 | Free-Machining Stainless Steel Plate, Sheet, and Strip |
Relevant products
42 2895 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| SA-437 Grade B4B/SUS 616 /422 Forged Bar | Dia.160xL | Round Bar | Kgs | 2120 | Forged+QT | Enquiry |
| Stainless Steel 422 / Alloy 422 AMS 5655 UNS S42200/616/B4B Round Bar Stock | Select | 0 | Select | Enquiry |