AS 317 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 317
201-2
301
302
304
304L
310
310S
316
316L
316Ti - AS
- Australia
- Australia Stainless steel
Chemical composition % of the ladle analysis of grade 317
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) | Ti(%) |
| 0.08 | 0.75 | 2 | 0.045 | 0.030 | 16.0-20.0 | 11.0-15.0 | 3.00-4.00 | Max 0.10 | 5XC (C+N)Max 0.70 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 379 (≥) | 333 (≥) | 24 | 11 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 612 (≥) | 739 (≥) | 41 | 11 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 419 | 275 | 474 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH3170 | Iron-based superalloy |
||
| 317 | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
||
| 317 | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
||
| 317 | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
||
| A 167 Type 317 | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
||
| A 182 F 317 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
||
| A 213 TP317 | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
||
| A 240 Type 317 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
| A 276 317 | Stainless Steel Bars and Shapes |
||
| A 314 317 | Stainless Steel Billets and Bars for Forging |
||
| A 358 317 | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
||
| A 403 WP 317 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
||
| A 409 TP317 | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
||
| A 473 317 | Stainless Steel Forgings |
||
| A 511 MT317 | Seamless Stainless Steel Mechanical Tubing |
||
| A 554 MT 317 | Welded Stainless Steel Mechanical Tubing |
||
| A 580 Type 317 | Stainless Steel Wire |
||
| A 632 Grade TP 317 | Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
||
| A 813 Grade TP 317 | Single- or Double-Welded Austenitic Stainless Steel Pipe |
||
| A 814 Grade TP 317 | Cold-Worked Welded Austenitic Stainless Steel Pipe |