CSN 05 5384 Enquiry | Print this page
- Category
- Type
- Steel grade
- Standard
- Country
- USE
- Grades
- Special Alloy
- » 05 5384
05 5364
05 5371
05 5372
05 5373
05 5374
05 5375
05 5377
05 5380
05 5381
05 5383 - CSN
- Czech Republic
- The Czech republic Structural steel
Chemical composition % of the ladle analysis of grade 05 5384
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) |
¢0.12 | 0.20-1.00 | 0.60-2.00 | 0.045 | 0.030 | 17.0-20.0 | 8.00-11.0 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
544 (≥) | 346 (≥) | 12 | 42 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 234 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
511 (≥) | 219 (≥) | 42 | 24 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
239 | 661 | 376 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
F10005 | Used in the products of the automobile, truck, tractor, and allied industries; small cylinder blocks, cylinder heads, air cooled cylinders, pistons, clutch plates, oil pump bodies, transmission cases, gear boxes, clutch housings, and light-duty brake drum |
||
T72305 | Carbon tool steel |
||
205 | Stainless steel and heat resistant steel |
||
ASTM 205 | Stainless steel and heat resistant steel |
||
S20501 | Stainless steel and heat resistant steel |
||
305 | Stainless steel and heat resistant steel |
||
A 167 Type 305 | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
||
A 240 Type 305 | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
||
A 249 TP305 | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
||
A 276 305 | Stainless Steel Bars and Shapes |
||
A 313 Type 305 | Stainless Steel Spring Wire |
||
A 314 305 | Stainless Steel Billets and Bars for Forging |
||
A 368 Type 305 | Stainless Steel Wire Strand |
||
A 473 305 | Stainless Steel Forgings |
||
A 478 Type 305 | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
||
A 492 Type 305 | Stainless Steel Rope Wire |
||
A 493 Type 305 | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
||
A 511 MT305 | Seamless Stainless Steel Mechanical Tubing |
||
A 554 MT 305 | Welded Stainless Steel Mechanical Tubing |
||
A 580 Type 305 | Stainless Steel Wire |