AISI E 52100
AISI E 52100 properties and heat treatment forged piece, Including AISI E 52100 application and specifications, We have all specifications，Including AISI E 52100 steel plate, AISI E 52100 sheet, AISI E 52100 square steel, AISI E 52100 flat bar,AISI E 52100 round bar,AISI E 52100 forgings, we can own production and sales.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
forged/hot rolling/ extrusion of steel
We can produce the AISI E 52100 has the following specifications:
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade AISI E 52100 and Standards
AISI E 52100 steel
Categories: Metal; Ferrous Metal; Alloy Steel; AISI 5000 Series steel; Low Alloy Steel; Carbon Steel; High Carbon steel
Material Notes: E52100 has metallurgical and processing characteristics similar to alloy TBS-9, HRC tests taken after 1 hour at tempering temperature
Key Words: UNI 100 Cr 6 (Ital.), B.S. 534 A 99, B.S. 535 A 99, ASTM A 295, ASTM A295, ASTM A519, ASTM A535, ASTM A646, ASTM A711, MIL SPEC MIL-S-980, MIL SPEC MIL-S-7420, MIL SPEC MIL-S-22141, SAE J404, SAE J412, SAE J770, DIN 1.3505, AFNOR 100 C 6(Fr), 100Cr6, UNS G52986, AMS 6440, AMS 6441, AMS 6444, AMS 6447, ASTM A322, ASTM A331, ASTM A505
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.81 g/cc | 0.282 lb/in³ | annealed |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Knoop | 875 | 875 | Converted from Rockwell C hardness. |
| Hardness, Rockwell C | 62 | 62 | quenched in oil from 150°C tempered. |
| 64 | 64 | quenched in oil | |
| 64 | 64 | quenched in water from 150°C tempered. | |
| 66 | 66 | quenched in water | |
| Hardness, Vickers | 848 | 848 | Converted from Rockwell C hardness. |
| Modulus of Elasticity | 210 GPa | 30500 ksi | |
| Bulk Modulus | 140 GPa | 20300 ksi | Typical for steels. |
| Poissons Ratio | 0.300 | 0.300 | Calculated |
| Machinability | 40 % | 40 % | spheroidized annealed and cold drawn. Based on 100% machinability for AISI 1212 steel. |
| Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.0000219 ohm-cm | 0.0000219 ohm-cm | Typical 5000 series steel |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 11.9 µm/m-°C @Temperature 23.0 - 280 °C |
6.61 µin/in-°F @Temperature 73.4 - 536 °F |
annealed |
| 12.5 µm/m-°C @Temperature 23.0 - 280 °C |
6.94 µin/in-°F @Temperature 73.4 - 536 °F |
hardened | |
| Specific Heat Capacity | 0.475 J/g-°C | 0.114 BTU/lb-°F | Typical 5000 series steel |
| Thermal Conductivity | 46.6 W/m-K | 323 BTU-in/hr-ft²-°F | Typical steel |
| Component Elements Properties | Metric | English | Comments |
| Carbon, C | 0.980 - 1.10 % | 0.980 - 1.10 % | |
| Chromium, Cr | 1.30 - 1.60 % | 1.30 - 1.60 % | |
| Iron, Fe | 96.5 - 97.32 % | 96.5 - 97.32 % | As remainder |
| Manganese, Mn | 0.250 - 0.450 % | 0.250 - 0.450 % | |
| Phosphorous, P | <= 0.0250 % | <= 0.0250 % | |
| Silicon, Si | 0.150 - 0.300 % | 0.150 - 0.300 % | |
| Sulfur, S | <= 0.0250 % | <= 0.0250 % | |
Users viewing this material also viewed the following:
Latrobe Lescalloy® 52100 VAC-ARC High Performance Bearing Steel
AISI 4340 Steel, annealed, 25 mm round
AISI 440 Stainless Steel
AISI 4150 Steel, annealed 815°C (1500°F)
304 Stainless Steel
M521AA / 8220
Machining performance
Download AISI E 52100 the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.